+- Second Life Copybot (https://secondlifecopybot.com)
+-- Forum: SECOND LIFE PRODUCTS (https://secondlifecopybot.com/forum-1.html)
+--- Forum: SCRIPTS (https://secondlifecopybot.com/forum-1022.html)
+---- Forum: SCRIPTS (https://secondlifecopybot.com/forum-8.html)
+----- Forum: Communication Scripts (https://secondlifecopybot.com/forum-46.html)
+----- Thread: E-mailer Basic Script (/thread-1230.html)
E-mailer Basic Script - YoungMoney - 03-04-2013
Menu driven e-mailer. Sens emails from Second Life. Menu asks Address, Subject and Message to write in local chat.
Code:
// Menu driven e-mailer. Sens emails from Second Life. Menu asks Addresse, Subject and Message to write in local chat.
//...........One Way Email Terminal..........
//.......Originally written by Doc Nerd......
// This Script is distributed under the terms of the modified BSD license, reproduced at the end of the script.
// The license and acknowledgments listed must be included if this script is redistributed in a non-readable or non-modifiable form.
// Retrieved from from Free SL Scripts on http://www.freeSLscripts.com or www.gendersquare.org/sl
//..........Variable Block..........
key senderKey;
string senderName;
string eMail;
string subject;
string bodyText;
list sendButtons = ["Yes", "No"];
list writeButtons;
string removeButton;
integer i;
//..........Modules Block..........
//..........Modules for writing each part of email..........
writeAddress()
{
llListen(0, "", senderKey, ""); //Listen to what the user says.
llSay(0, "Please say the address of whom you are sending your email."); //Tell them what to say.
llSetTimerEvent(30); //Give them 30 seconds to say it.
}
writeSubject()
{
llListen(0, "", senderKey, ""); //Listen to what the user says.
llSay(0, "Please say the subject of your email."); //Tell them what to say.
llSetTimerEvent(30); //Give them 30 seconds to say it.
}
writeBody()
{
llListen(0, "", senderKey, ""); //Listen to what the user says.
llSay(0, "Please say the message you would like to send."); //Tell them what to say.
llSetTimerEvent(120); //Give them 120 seconds (2 minutes) to say it.
}
//..........Modules to remove buttons already used in llDialog menu..........
removeAddress()
{
i = llListFindList(writeButtons, ["Address"]); //Find "Address" button in list.
writeButtons = llDeleteSubList(writeButtons, i, i); //Remove it where it's found.
}
removeSubject()
{
i = llListFindList(writeButtons, ["Subject"]); //Find "Subject" button in list.
writeButtons = llDeleteSubList(writeButtons, i, i); //Remove it where it's found.
}
removeMessage()
{
i = llListFindList(writeButtons, ["Message"]); //Find "Message" button in list.
writeButtons = llDeleteSubList(writeButtons, i, i); //Remove it where it's found.
}Code:
//..........Running script block..........
default
{
state_entry()
{
llSetObjectName("Nerd Gadgets Emailer 100"); //Makes sure the object is called the Nerd Gadgets Emailer 100.
writeButtons = ["Address", "Subject", "Message"]; //Sets the llDialog buttons.
llListen(67895, "", senderKey, "Yes"); //Activate listeners.
llListen(67895, "", senderKey, "No");
}
touch_start(integer total_number)
{
senderKey = llDetectedKey(0); //Detects who's touching it, to get a raw key.
senderName = llKey2Name(llDetectedKey(0)); //Detects who's touching it, to get a name.
llDialog(senderKey, "Greetings " + senderName + ", would you like to send an email?", sendButtons, 67895); //Do you like me? Y/N
}
listen(integer channel, string name, key id, string message)
{
if(message == "Yes") //Starts email writing process.
{
llSay(0, "Currently being used by " + senderName + "."); //Tells area who's using terminal.
state emailer;
}
if(message == "No") //Thank you, come again.
{
llSay(0, "Thank you " + senderName + ", for using the " + llGetObjectName());
}
}
}
state emailer
{
state_entry()
{
if(writeButtons == []) //Check to see if there's anything left to write in the email.
{
state sendMail; //If not, move to sending module.
}
llListen(67895, "", senderKey, "Address"); //Activate listeners.
llListen(67895, "", senderKey, "Subject");
llListen(67895, "", senderKey, "Message");
llSetTimerEvent(30); //Gives user 30 seconds to choose a part to write...
llSay(0, "You have 30 seconds to choose."); //Informs user they have 30 seconds to choose.
llSetText("In use, please wait.", <255,0,0>, .1); //Gives visual cue to others that no one else can use it right now.
llDialog(senderKey, "What part of your message would you like to write?", writeButtons, 67895); //Selection button GUI.
}
listen(integer channgel, string name, key id, string message)
{
if(message == "Address") //Select "Address" button.
{
state addressWrite; //Enter address writing state.
}
else if(message == "Subject") //Select "Subject" button.
{
state subjectWrite; //Enter subject writing state.
}
else if(message == "Message") //Select "Message" button.
{
state messageWrite; //SEnter message writing state.
}
}
timer() //After 30 seconds are up, time out, and return to default state.
{
llSetTimerEvent(0);
llSay(0, "User has failed to select option in time. Unit is now available for use or retry.");
llSetText("",<0,0,0>, 0); //Removes floating text.
state default;
}
}
state addressWrite
{
state_entry()
{
writeAddress(); //Start address writing module.
}
listen(integer channel, string name, key id, string message)
{
eMail = message; //Save message user said.
removeButton = "Address"; //Set variable for button removal.
state remainButton; //Enter button removal process state.
}
timer() //After 30 seconds are up, time out, and return to selection state.
{
llSetTimerEvent(0);
llSay(0, "User has failed to enter information quickly enough. Please try again.");
state emailer;
}
}
state subjectWrite
{
state_entry()
{
writeSubject(); //Start subject writing module.
}
listen(integer channel, string name, key id, string message)
{
subject = message; //Save message user said.
removeButton = "Subject"; //Set variable for button removal.
state remainButton; //Enter button removal process state.
}
timer() //After 30 seconds are up, time out, and return to selection state.
{
llSetTimerEvent(0);
llSay(0, "User has failed to enter information quickly enough. Please try again.");
state emailer;
}
}
state messageWrite
{
state_entry()
{
writeBody(); //Start message writing module.
}
listen(integer channel, string name, key id, string message)
{
bodyText = message; //Save what the user said.
removeButton = "Message"; //Set variable for button removal.
state remainButton; //Enter button removal process state.
}
timer() //After 120 seconds (2 minutes) are up, time out, and return to selection state.
{
llSetTimerEvent(0);
llSay(0, "User has failed to enter information quickly enough. Please try again.");
state emailer;
}
}
state remainButton //Removing buttons from a list SUCKS!
{
state_entry()
{
if(removeButton == "Address") //Removes "Address" button.
{
removeAddress();
state emailer;
}
else if(removeButton == "Subject") //Removes "Subject" button.
{
removeSubject();
state emailer;
}
else if(removeButton == "Message") //Removes "Message" button.
{
removeMessage();
state emailer;
}
}
}
state sendMail
{
state_entry()
{
llListen(67895, "", senderKey, "Yes"); //Starts listeners.
llListen(67895, "", senderKey, "No");
llSay(0, "Your email reads as the followed:"); //Spews out the actual email message.
llSay(0, eMail);
llSay(0, subject);
llSay(0, bodyText);
llDialog(senderKey, "Do you wish to send this message?", sendButtons, 67895); //Do you like me? Y/N
}
listen(integer channel, string name, key id, string message)
{
if(message == "Yes") //You like me! You really like me!
{
llSay(0, "I hope you don't mind " + senderName + ", but I will have to assume your name for a moment to send this email."); //Tell user the terminal will change it's name for proper "From" headings in inbox.
llSay(0, "Your email will be sent in 20 seconds."); //Tells user email will be sent in 20 seconds (delay of llEmail function call to script).
llSay(0, "Thank you " + senderName + ", for using the " + llGetObjectName()); //Thank you, come again.
llSetText("", <0,0,0>, 0); //Removes "busy signal".
llSetObjectName(senderName); //Change to user's name.
llEmail(eMail, subject, bodyText); //Send that damn thing already!
state default; //Return to normal.
}
else if(message == "No") //You don't like me? *emo tear*
{
llSay(0, "Thank you " + senderName + ", for using the " + llGetObjectName()); //Thank you, come again.
llSetText("", <0,0,0>, 0); //Removes "busy signal".
state default; //Return to normal.
}
}
}